CI810B 3BSE020520R1 ABB AF 100 Fieldbus Comm. Interface
Product Detail
CI810B 3BSE020520R1 ABB AF 100 Fieldbus Comm. Interface
CI810B AF100 Fieldbus Communication Interface
2*AF100 Twisted Pair Modems.
Including:
1 pce Power Supply Connector 3BSC840098R1
1 pce TB807 Module bus Terminator 3BSE008538R1
2 pcs Terminal Blocks 3BSC840098R1
The basic system software version 1.5 loaded.
AF100 Connector 3BSC840105R1
Exchange No. EXC3BSE020520R1
product Safety
Electrostatic Sensitive Device
Devices labeled with this symbol require special handling precautions as described in the installation section.
Equipment Environment
All components, whether in transportation, operation or storage, must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with energized parts is avoided when servicing.
Specific Warnings
Page 108: In I.S. applications modules with I.S. Interfaces MUST be mounted right most of the I/O station or as a separate group.
The installation must be performed by qualified personnel. It must comply with the relevant national/international standards (e.g. IEC 79-14, CEI 64-2, BS 5345 Pt. 4, DIN VDE 165) and in line with the established installation rules and recommended practice (e.g. CEI 64-8, ANSI/ISA
RP-12.6). The conformity of hazardous area field devices with the related system documentation must always be checked.
When using modules with I.S. Interfaces in non I.S. applications, the I.S. modules can be placed in any position following the same rules as non I.S. modules.
Page 120: The calculated load of Advant Fieldbus 100 must be equal to or less than 70%.
Page 122: The calculated load of Advant Fieldbus 100 must be equal to or less than 50%. NOTE! 1 ms cycle time is not allowed.
Page 123: The calculated load of Advant Fieldbus 100 must be equal to or less than 50%. NOTE! 1 ms cycle time is not allowed.
Write your message here and send it to us
