China Haynes 263 nickel alloy pipe, UNS N07263 nickel bar, Haynes 263 plate supplier Manufacturer and Supplier | TCT

Haynes 263 nickel alloy pipe, UNS N07263 nickel bar, Haynes 263 plate supplier

Short Description:

HAYNES 263 alloy (UNS N07263) is an age-hardenable nickel-cobalt-chromium-molybdenum alloy developed specifically to combine good age-hardened strength properties with excellent fabrication characteristics in the annealed condition. HAYNES 263 alloy exhibits excellent intermediate temperature tensile ductility, and is not normally subject to strain age cracking problems common for gamma prime strengthened alloys.  Its strength at elevated temperature is not quite as high as materials such as HAYNES 282 alloy, Waspaloy alloy, or R-41 alloy.  However, it is much easier to form or weld than Waspaloy alloy and R-41 alloy.  Because HAYNES 282 alloy exhibits superior tensile, creep-rupture, and low cycle fatigue strength than HAYNES 263 alloy and has significantly greater fabricability than Waspaloy and R-41 alloys, it is replacing HAYNES 263 alloy in many applications.HAYNES 263 alloy is normally used for applications up to about 1650°F (900°C). Its oxidation resistance is comparable to that for other gamma-prime-strengthened superalloys.


Product Detail

Product Tags

Applications

▪ HAYNES C 263 is used in the following application areas:
▪ Gas turbine hot section components such as medium temperature combustors
▪ Aircraft turbine engine components
▪ Land-based turbine components
▪ Low temperature combustors
▪ Transition liners

Chemical Composition

Element Content (%)
Nickel, Ni 52
Chromium, Cr 20
Cobalt, Co 20
Molybdenum, Mo 6
Titanium, Ti 2.4
Iron, Fe 0.7
Aluminum, Al 0.6
Manganese, Mn 0.6
Silicon, Si 0.4
Copper, Cu 0.2
Carbon, C 0.06

Mechanical Properties

Properties Metric Imperial
Tensile strength 1050 MPa 152.3 ksi
Yield strength 635 MPa 91.9 ksi
Elastic modulus 221 GPa 32.1 psi
Elongation at break 35.70% 35.70%

available sizes and specifications

Haynes 263 available sizes and specifications
Grade Haynes 263
Nickel plate Thickness: 0.3mm – 150.0mm
Width: 1000mm – 3000mm
Nickel strip/ nickel foil Thickness: 0.02mm – 16.0mm
Width: 5mm – 3000mm
Nickel coil Thickness: 0.3mm – 16.0mm
Width: 1000mm – 3000mm
Nickel pipe Outside diameter: 6mm – 1219mm
Thickness: 0.5mm – 100mm
Nickel Capillary Pipe Outside diameter: 0.5mm – 6.0mm
Thickness: 0.05mm – 2.0mm
Nickel bar Diameter: Ф4mm – Ф600mm
Nickel wire rod Diameter:Ф0.01mm – Ф6mm


  • Previous:
  • Next:

  • Write your message here and send it to us