MaxCure9 1s Dental Curing Light
01 Dual intensity mode
●P1 High intensity mode
For orthodontic brackets, post and core and curing photosensitive adhesive in porcelain veneer. Used for quick curing, ensuring curing depth, more efficient.
Constant intensity: 2300-2500mw/cm²
Time setting: 1s, 3s
●P2 General intensity mode
For normal resin; For most treatment scenarios like teeth filling, restoration etc.
Constant intensity: 1000-1200mw/cm²
Time setting: 5s, 10s, 15s, 20s
02 Broad-spectrum
Most of the resins on the market use CQ as the photoinitiator, but some resins use two new types of photoinitiators, diphenylphosphorus oxide or lvocerin, and the new materials containing TPO have a light absorption peak of 405nm. If you use an ordinary narrow-spectrum light curing machine (wavelength range: 420nm-480nm), the resin is prone to incomplete curing. And we know that incomplete composite curing often leads to secondary pulpitis, apical inflammation, and tooth hypersensitivity.
MaxCure 9 broad-spectrum light curing, newly added the 385-420nm band, the wavelength range is 385nm-515nm. It can better cure resin materials containing TPO and other emerging photoinitiators, and is suitable for ideal curing of all resin materials on the market.
After a full upgrade, MaxCure 9 changes from a single blue light to a blue-violet light, which can truly cure all light curing materials.
03 Super large battery capacity
Lithium battery-International CB certification
04 AI intelligence system
Constant Current Driver
Constant light intensity
Constant light intensity output, stabilizing the working power
Light Guide Automatic Detection
The main unit will detect the light guide and stop the “Er” flashing if the guide is connected well, or the main unit will close down after 10s flashing.
Well-installed during the period of the error alarm will stop the error alarm and the lamp will light up instantly when the lamp holder is installed.
Overheating Protection
Main unit will detect the temperature. The overheating protection program will run when the curing light reaches a certain temperature after long time use. It’ll keep flashing until 200s later that it recovers from high-temperature.
Battery Performance Detection
When detect an inconstant power output from battery, the main unit will stop working to warn with flashing “Er”
Overvoltage Protection
With overvoltage adapter, MaxCure9 is under protection and can’ t be charged. The original adapter is recommended.
Technical Parameters
| Battery voltage and capacity | 3.6V/2600mAh |
| Power supply input | 100-240VAC, 50Hz/60Hz |
| Power supply output | 5VDC/1A |
| Light intensity | 1000mW/cm²-2500 mW/cm² |
| Modes setting | TURBO mode: Display P1, Light intensity 2300-2500mW/cm²NORMAL mode: Display P2, Illumination 1000-1200mW/cm² |
| Time setting | TURBO mode: 1s, 3sNORMAL mode: 5s, 10s, 15s, 20s
Lightly press the time button to choose the solidification time. |
| Dimensions | Φ26mm×255mm |
| Net weight | 144g |
| Light source | a) 5W high power blue LEDb)Wave length: 385nm-515nm |
| Consumption power | ≤5W |
| Composed mainly | Main unit, charger, light hood, LED lamp, battery and power adapter |
