China Plastic Intalox Saddle with PP/PE/CPVC Manufacturer and Supplier

Plastic Intalox Saddle with PP/PE/CPVC

Short Description:

Plastic Intalox Saddle combines the advantages of the ring and saddle to help improve the efficiency of liquid distribution. Compared with the Pall ring, it has less resistance, greater flux and higher efficiency. At the same time, this kind of packing is also one of the most widely used packings, with good strength, high mass transfer efficiency and convenient operation.

Send email to us Download as PDF

Product Detail

Product Tags

Material

Our Factory assure all tower packing made from 100% Virgin Material.

Technical Data Sheet

Product Name				Plastic Intalox Saddle
Material				PP,PE,PVC,CPVC,PVDF ,etc
Life Span				>3 years
Size Inch/mm		Surface Area m2/m3		Void Volume %	Packing Number pieces/ m³	Packing Density Kg/m³	Dry Packing Factor m^-1
1”	25×12.5×1.2	288		85	97680	102	473
1-1/2”	38×19×1.2	265		95	25200	63	405
2”	50×25×1.5	250		96	9400	75	323
3”	76×38×2	200		97	3700	60	289
Feature			High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage			1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability.2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application			These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

Physical & Chemical properties

Performace/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density (g/cm3) (after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation Temp.(℃)	90	＞100	＞120	＞60	＞90	＞150
Chemical Corrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression Strength (Mpa)	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0