Application of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

Used for pre-set control of pipeline flow, this series of products are mainly used to solve the problem of draulic imbalance in the fluid transmission and distribution network. According to the system design, it is determined that the branch water supply is constant under the premise of different openings and pressure differences.

The KMF balancing valve delivers accurate dronic performance in an impressive range of applications. Ideally suited for use on the secondary side in heating and cooling systems, and tap water systems.

Features of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

• The static balance valve has a precise design, simple structure, and accurate parameters. After the product is installed, the flow should be debugged to meet the flow under the premise of setting the pressure difference. It is an energy-saving product.
• Used in heating or cooling water systems.
• Shutdown function.
• The maximum stroke locking function, when the system is commissioned, can be turned on to provide convenience for future pipeline maintenance and repair. After maintenance or repair, the valve can be directly restored to the set maximum stroke to avoid secondary debugging.
• The valve carries a measurement joint, which is convenient for quick connection with the measurement equipment and saves debugging time.
• Can be installed in the water supply or return water pipeline.

Material of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

Permissible Media of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

Types and Technical Data of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

Kv Values of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

Internal thread (DN15-50)

Flanged (DN65-400)

Measuring accuracy of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

The zero position is calibrated and must not be changed.

Deviation of flow at different settings

The curve (Fig. 1) is valid for valves with normal pipe fittings (Fig.2). Try also to avoid mounting taps and pumps, immediately before the valve.

Fig.2

Adjust the scale of the handwheel according to the design requirements.

Exhaust devices should be installed in the system piping, and the system can contain air, which may cause media blockage, failure of the adjustment function, or excessive noise;

It is recommended to add a filter or clean the pipeline at the water inlet of the valve to avoid large particles of impurities blocking the valve control element;

Pay attention to the protection of the detection hole, if it is touched or deformed, it will cause leakage or difficult maintenance in the future.

Setting off of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

Adjust the scale of the handwheel according to the design requirements.

This valve has the function of presetting the maximum flow rate. Use a hexagonal wrench to rotate the maximum opening limit core clockwise, so that the maximum opening of the valve can be limited, and subsequent system maintenance will not require debugging.

Application Method of S6068. PN16 Flanged (ISO7005-2) DN50-DN300

The balance valve can be used alone to control the flow of the system, or it can be used in conjunction with the differential pressure valve. When the valve is installed, the water flow direction must be consistent with the direction of the arrow on the valve. In order to ensure the measurement accuracy, please ensure that there are straight pipe sections before and after the valve(Fig.2)