China Thread-connection rubber joint Manufacturer and Supplier | TCT

Thread-connection rubber joint

Short Description:

Main materials:Serial number name material1 Inner and outer rubber NR, NBR, EPDM2 Main frame nylon cord3 Booster ring multi-strand wire rope4 thread live joint malleable cast iron


Product Detail

Product Tags

Key data

DN

Length L
(mm)

Turn displacement(mm)

Lateral Displacement
(mm)

Deflection Angle
(a1+a2)

mm

inch

extension

compression

20

¾

200

5~6

22

22

45

25

1

200

5~6

22

22

45

32

200

5~6

22

22

45

40

200

5~6

22

22

45

50

2

200

5~6

22

22

45

65

265

8~10

24

24

45

80

3

285

8~10

24

24

45

Product Introduction

JGD-B type wire-connected double ball rubber joint is composed of fabric reinforced rubber body and thread joint, which is used for vibration and noise reduction and displacement compensation of pipeline. Also called double ball wire connection or wire connection rubber joint, it is also called rubber soft joint, shock absorber, pipeline shock absorber, shock absorber throat, etc., but the name is different, but all refer to JGD-B type wire connection double ball rubber joint.

This product introduces the production process, the rubber body in the forming process of the inner layer under high pressure, nylon cord fabric and rubber layer to get a better combination. The product produced by the process is characterized by the inner rubber layer mixed into one, smooth and seamless marks, and the label is vulcanized and combined with the product.

[Features] : With high pressure resistance, good elasticity, large displacement, balance pipeline deviation, vibration absorption, good noise reduction effect, easy installation and so on.
[Scope of use] : can be widely used in water supply and drainage, circulating water, HVAC, fire, paper, pharmaceutical, petrochemical, ship, pump, compressor, fan and other pipeline systems, such as power plants, water plants, steel mills, water companies, engineering construction and so on.
[Applicable medium] : The ordinary type is used for transporting -15℃ ~ 80℃ air, compressed air, water, seawater, oil, acid, alkali, etc. The special type is used to transport the above medium or oil, concentrated acid and alkali, solid materials above -30℃ ~ 120℃.

Technical conditions

Working pressure 1.6MPa (16kg f/cm2) Deflection Angle (a1+a2)45°
Bursting pressure 4.8MPa (48kg f/cm2) Vacuum 53.3KPa(400mmHg)
Applicable temperature -15 ~ +80℃, special up to -30 ~ +120℃
Applicable medium air, compressed air, water, seawater, hot water, oil, acid, alkali, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us