WD-1201M-DIN(D)
1.1.1 TECHNICAL PARAMETERS
● Support HomeplugAV2 Protocol standard
● Industrial DIN rail style installation
● The maximum transfer distance up to 500 meters.
● Self-adapt the rate
1.1.2 MANAGEABILITY
● Quality of Service(QoS) 。
● IGMO(IPv4)Snooping&MLD(IPv6)Snooping
1.1.3 WORKING ENVIRONMENT
● Working temperature: -40℃-80℃。
● Operating humidity: 10%-85% no condense.
● Storage humidity:5%-90% no condens
1.1.4 DESIGN STANDARDS
IEC 60529 IEC 50022 IEC 60068-2-6 HomeplugAV2
1.1.5 TECHNICAL PARAMETERS
| Model | WD-1201M-DIN(D) |
| Interface | 1*LAN 10/100/1000Base-TX self adaption RJ45，1*DC power interface |
| LED display light | Ethernet, PLC link ,Power |
| Transfer frequency | 2-68MHz MIMO |
| Protocol（PHY） | IEEE802.3，IEEE802.3x, IEEE802.3u HomeplugAV2 |
| Security | 128-AES |
| Number of each group | Up to 63 |
| installation | Rail TS35 |
| Protection level | IP40 |
| Modulation | OFDM |
| Effective transfer rate | TCP/IP 500Mbps |
| Manageability | 802.1D Ethernet Bridge |
| Quality of Service(QoS) | |
| IGMO(IPv4)Snooping&MLD(IPv6)Snooping | |
| Voltage range | DC 10V-80V |
| Operating temperature | -40℃-85℃ |
| Size | 123*97*47(mm)（L×W×H） |
| Weight | 0.25kg |
| Operating environment | Operating humidity:10%-85% (no condense) |
1.2 FEATURES
(1) Packet loss：≤0.1%（100M,load 70%）.
(2) Support 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤20MS.
1.3 IMMUNITY OF ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 IMMUNITY OF ELECTRICAL FAST TRANSIENT IMPULSE GROUP(COMMON MODE)
The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz, test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 ANTI INTERFERENCE OF SURGE IMPACT
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of
discharge tube type)
1.6 ANTI- VIBRATION
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test
1.7 INSTALLATION DRAWING
Write your message here and send it to us
