Witch shower – Rotating tube bundle cleaning headcleaning
22K PSI (1500 BAR):
| Length | diameter | Inlet connection type | range Flow |
Connection type) connection (BSPP entry pressure Maximum |
pressure Maximum |
I.D, Radius | |
| 48 mm 1.9 in. |
26 mm 1.0 in. |
1/8″NPT, 1/4″NPT, 1/4″BSPP, 3/8″-28LH/RH, 9/16″-18LH/RH | 30-76l/min 8-20 gpm |
N/A | 550-1500 bar 8-22kpsi |
30-76 mm 1.2-3.0 in. |
BT25 |
| 39 mm 1.5 in. |
18 mm 0.69 in. |
P1, P2, BSPP2, MPL6, MPR6, MPL4, MPR4 | 42 lmin 11 gpm |
1250 bar 18k psi |
1500 bar 22kpsi |
22-33 mm 0.87-1.3 in. |
BT18 |
| 33 mm 1.3 in. |
13mm 0.50 in. |
P1, M7, MPL4, MPR4 | 32I/min 8.5 gpm |
NA | 1500 bar 22kpsi |
15-25 mm 0.60-1.0 in. |
BT12 |
| 180 mm 6.9 in. |
33 mm 1.3 in. |
1/2″NPT, 1/2″BSPP, / 9/16″MP | 45-1901/min 12-49 gpm |
1000 bar 15k psi |
1500 bar 22kpsi |
38-60 mm 1.5-2.4 in. |
BN33 |
| 130 mm 5.1 in. |
24 mm 0.93 in. |
3/8″NPT, 3/8″BSPP, 9/16″LH / 9/16″RH | 45-95//min 12-25 gpm |
1500 bar 22kpsi |
1500 bar 22kpsi |
28-51 mm 1.1-2 in. |
BN24 |
| 97 mm 3.8 in. |
18 mm 0.69 in. |
1/4″NPT, 1/4″BSPP, 9/16″LH / 9/16″RH | 30-53 V/min 8-14gpm |
1400 bar 20kpsi |
1500 bar 22kpsi |
22-33 mm 0.87-1.3 in. |
BN18 |
| 76 mm 3.0 in. |
15 mm 0.6in. |
1/8″NPT, 1/8″BSPP, 3/8″LH/RH | 30-38I/min 8-10 gpm |
1250 bar 18kpsi |
1500 bar 22kpsi |
19-30 mm 0.75-1.2in |
BN15 |
| 74 mm 2.9 in. |
13 mm 0.50in. |
/8″NPT, 1/8″BSPP, 1/4″LH, 1/4″RH, 3/8″LH /3/8″RH | 27-38 Vmin 7-10 gpm |
1250 bar 18k psi |
1500 bar 22kpsi |
15-25 mm 0.60-1.0 in. |
BN13 |
| 65 mm 2.6 in. |
9.5 mm .37 in. |
M7, 1/16″NPT, 1/4″ LH / 1/4″RH | 17-30l/min 4.5-8 gpm |
NA | 1500 bar 22kpsi |
12-16 mm 0.47-0.63 in. |
BN9.5 |
Small diameter pipeline cleaning applications
The witch shower is a combination of four parts. Each component can be replaced independently, extending the service life of the cleaning head.
3 types of structure selection
You can buy different models according to different needs, or consult customer service.
Application field
Rotating nozzle of all sizes for effective cleaning of any dimensional heat exchanger tube bundle.
Please note:
When connecting the steel gun to the Witch Nozzle series, it is required to use the correct size of the open end wrench to properly fix the flat surface of the inlet connecting nut.
DO not use tube wrenches or hook wrenches with teeth!
An incorrect wrench will cause damage to the hardened rigid housing, resulting in the cleaning head operating under pressure Middle break. It is recommended to use WD-40@ rinse head before storage.
Other Recommendations
Other working conditions with actuator.
(Note: The above conditions need to be completed with various actuators, Need to purchase the unit and various actuators separately, can consult customer service)
Certificate Of Honor
